English
عربي 
Español
6061 aluminum sheet is a precipitation hardening alloy exhibiting good mechanical and welding characteristics. Often used in aircraft construction, automotive components and bridge engineering, alloy 6061 aluminum sheet is one the most popular aluminum due to its high strength, toughness, and excellent corrosion resistance.
6061 aluminum sheet is a hardening alloy showing good mechanical and welding characteristics. Alloy 6061 aluminum sheet is one the most popular aluminum due to its high strength, toughness, and excellent corrosion resistance. Mostly used in aircraft construction, automotive components and bridge engineering. Due to its superb surface finish and availability, 6061 aluminum sheet is also commonly used in consumer products including food and beverage packaging and cans, as well as private jets, yachts, and boats.
Specification
Typical Chemistry (% Maximum unless shown as a range)
Cu | Si | Fe | Mn | Mg | Zn | Cr | Ti | Al |
0.15 / 0.40 | 0.4 / 0.8 | 0.70 | 0.15 | 0.80 / 1.2 | 0.25 | 0.04 / 0.35 | 0.15 | Balance |
Mechanical Properties
Tensile Strength | Yield Strength | Elongation | Brinell Hardness | |||
Ksi | MPa | Ksi | MPa | % In 2" | ||
6061-0 | 18.0 | 126 | 8.0 | 56 | 25 | 30 |
6061-T4 | 34.0 | 238 | 22.0 | 154 | 21 | 65 |
6061-T6 (T651) | 44.0 | 308 | 41.0 | 287 | 17 | 95 |
Fabrication Guide
Weldability | ||||||
Corrosion Resistance | Formability | Machinability | Mpa | TIG | Resist. | |
6061-0 | B | A | D | A | A | B |
6061-T4 | B | B | C | A | A | A |
6061-T6 (T651) | B | C | C | A | A | A |
Features
·Very high corrosion resistance
·Excellent formability at temper 0
·Good formability at grades above 0
·Machining at temper 0 can be 'gummy'
·Machining at grades above 0 is fair
Applications
·Railway car components
·Yachts, boats, and aircraft structures
·SCUBA tanks
·Bridge components
·Pipe fittings
·Wheels and various transportation end uses
·Food and beverage cans
FAQ
Q: When can I get your reply after the inquiry about our 6061 aluminum sheet ?
A: Within 12 hours, our professional sales rep will contact you to offer a quote.
Q: What’s the terms of payment?
A: We can accept 100% irrevocable LC at sight, deposit 30% T/T, etc.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What kinds of alloy can you supply?
A: 1XXX-8XXX.
QR Code
